Average content price
10,300,000JPY
| ~10M JPY | 1 |
|---|---|
| ~25M JPY | 2 |
All products
9result
PC210-10 Used machine list
| ~10M JPY | 1 |
|---|---|
| ~25M JPY | 2 |
9 results
Result
9 results
Serch by content name
- PC78US-8 (138)
- PC120-8 (79)
- PC128US-8 (65)
- PC138US-8 (48)
- PC128US-10 (46)
- PC78US-10 (44)
- PC78UU-8 (38)
- PC138US-10 (36)
- PC200-10 (30)
- PC200-8N1 (27)
- PC128UU-2E0 (25)
- PC200-8 (23)
- PC228US-10 (22)
- PC30MR-3 (20)
- PC78UU-6E0 (20)
- PC138US-11 (19)
- PC128US-2E1 (18)
- PC200-11 (18)
- PC78US-6N0 (16)
- PC40MR-3 (15)
- PC138US-2E1 (14)
Item stock
Search by category
-
Used Mini Excavators
-
Used Excavators
-
Used Wheel Loaders
-
Used Dozers
-
Used Rollers
-
Used Graders
-
Used Finishers
-
Used Carrier dump
-
Used Crane
-
Used Aerial Platform Truck
-
Used Forklifts
-
Used Foundation machines
-
Used Self-propelled crushers
-
Used Attachments
-
Used Generators
-
Used Agricultural Equipment
-
Used Vehicle
Catalog information
| Index | Value |
|---|---|
| Model | |
| Operating mass | 21700 |
| Running speed fast / slow | 0.8 |
| Running speed fast / slow | 5.5/4.1/3.0 |
| Ability to climb | 35 |
| Turning speed | 12.4 |
| Bucket digging force | 138{14100} |
| Arm excavating force | 101{10300} |
| Ground pressure | 48.1 |
| Transportation total length(Min) | 9625 |
| Full width during transportation(Min) | 2875 |
| Overall Height at Transport | 3135 |
| Crawler total length | 4070 |
| Standard shoe width | 600 |
| Model | コマツ SAA6D 107E-2-A |
| Type | 直噴式 ターボ 空冷アフタクーラ付 |
| Rated output (gross) | 123.2/2,000{168/2,000} |
| Pump type | 可変ピストン式 |
| Maximum pressure Normal / Boosted | 37.3{380}/34.8{355} |
| Motor type | 可変ピストン式 |
| Swivel motor type | 固定ピストン式 |
| Fuel tank capacity | 400 |
| Hydraulic fluid capacity | 234(132) |
| Type of arm | 2900アーム |
| Maximum excavation radius | 9875 |
| Maximum excavation radius of the floor surface | 9700 |
| Maximum excavation depth | 6620 |
| Maximum excavation height | 10000 |
| Maximum dump height | 7110 |
| Maximum vertical depth | 5980 |
| Minimum turning radius | 3040 |