Catalog Search
Catalog
specification
| Maker | NIPPON SHARYO |
|---|---|
| Type | -- |
| Model | DH758-160M |
| Year | -- |
| Maximum leader length | 21~39 m |
| Full Equipment Maximum Weight (Allowable Movement) | 162 ton |
| Winch count [options] | 3+[1]; 主巻， 補巻.サード，[第四] |
| Mountable electric / hydraulic earth auger | 240HP |
| Mounting possible electric auger permissible torqu | 294 [30] kN･m [tf･m] |
| Allowable hydraulic pressure auger permissible tor | kN･m [tf･m] |
| Allowable pulling load | 735 [75] kN [tf] |
| Hydraulic hammer mountable | NH-150B 以下 |
Working speed * depe
| * Main winding, supplementary winding rope low spe | "39(3.9)" m/min |
|---|---|
| * Hoist speed High speed | 78(7.8) m/min |
| Main winding, auxiliary winding rope low speed | 39(3.9) m/min |
| Rolling speed High speed | 78(7.8) m/min |
| * Third (fourth) · Rope winding speed | 42(4.2) m/min |
| * Third (fourth) · Rope winding speed | 42(4.2) m/min |
| * Leader hoist rope winding speed | 40(4.0) m/min |
| * Leader hoist rope winding speed | 40(4.0) m/min |
| Turning speed | 1.8 min-1 |
| Running speed | 1.1/0.8(0.11) km/h |
| Ability to leave (machine body only) | 40% % |
| Aircraft mass | ton |
| Counter weight | 21.9 ton |
| Standard reader (length) | 21 m |
| Pile Driver Full Equipment Maximum Weight (Traveli | 162 ton |
| Contact area | 89870 cm² |
| Earth pressure (with pile driver fully equipped ma | 174[1.78] kPa [kgf/cm2] |
| engine | 日野Ｊ08E-TM |
| Rated output | 159[216]/2000 kW[PS]/min-1 |
| Maximum torque | 797[81.3]/1600 kN〔kgf･m〕/min-1 |
| Fuel consumption rate | 208 [153] g/kＷh [172g/PSh] |
| Storage battery | 24Ｖ-120Ａ･h |
| Fuel tank | 250 l |
Main dimension
| Full width When the crawler contracts | 3480 mm |
|---|---|
| Overall crawler Upon expansion | mm |
| Overall crawler When contracting | 3480 mm |
| Crawler center distance Upon expansion | 4000 mm |
| Crawler center distance When contracting | 2620 mm |
| Crawler · shoe width | 800 mm |
| Crawler total length | mm |
| Tumbler center distance | 5225 mm |
| Minimum ground clearance | 374 mm |
| Cab width | 3220 mm |
| Cab height | 3396 mm |
| Gantry height | 8124 mm |
| Gantry height | 3392 mm |
| Rear end turning radius At work: Outrigger beam | 6477 mm |
| Rear end turning radius Counter · weight end face | 5283 mm |
| Rear end ground clearance | 1344 mm |